Before you follow these instructions you need to get the correct Sky code for your tv remote from http://www.buyme24buyme.com/blog/sky-remote-technical-help/sky-remote-tv-tuning-codes/ It is advised that you try the 4 digit codes first.

Step 1. Turn your TV on.

Step 2. Press tv on your Sky remote control.

Step 3. Hold down select and the red button together for about two seconds, until the red light on the Sky remote control blinks twice

Step 4. Press tv on your Sky remote control again.

Step 5. Key in the four digit code or 3 digit code for your brand of TV For example 0060(Samsung). The light on the Sky remote control should blink twice if it does not then go back to Step 1 and try another code given. If it does flash twice continue to Step 6.

Step 6. Press tv again then press the standby button. If the remote does not turn off the first time repeat this twice again for example tv, standby, tv, standby.

Step 7. Once the tv turns off press the select button and the remote should blink twice and lock the code in.

You should now Have all functions.

If you do not find these instructions useful Please follow these instructions below

Tune In Sky Remote Option 2

Using your Sky remote Press INTERACTIVE BUTTON followed by SKY CUSTOMER SERVICES,
then TECHNICAL ASSISTANCE, FOR ALL SKY REMOTES. THEN FOLLOW THE ON TV INSTRUCTIONS.